Shelves
Shelves
STALAK ZA BODY CONTOUR
This metal stand gives Body Contour hardware a dedicated home: a 560 × 500 mm top plate with cutouts for handpieces and cable routing, a 440 × 470 mm base that stays planted, and 755 mm of working height that lines up with typical treatment flows. Lock in the device, then roll the whole station between rooms—casters are spec’d as yes—without lifting a 13 kg chassis more than you have to. Gross weight 13.5 kg, net 13 kg.
- Welded steel tubing and a wide footprint keep the column from flexing when clients lean in—your handpieces stay on target instead of vibrating off the mark.
- 560 × 500 mm gives the console breathing room while routed slots keep leads from snaking across the client’s field of view.
- Casters let one therapist reposition the entire stack for body contouring, lymphatic follow-ups, or storage—no team lift required.
Shelves
STALAK ZA RF FACE & BODY
Give your RF Face Body system a fixed address: plastic-coated steel uprights resist disinfectant splashes, while melamine-faced chipboard shelves stay flat and wipeable under consoles and handpieces. The cabinet occupies 500 × 640 × 840 mm—enough vertical storage for cables and gels without dominating the room—and at 15 kg it stays planted when you roll probes across the face–body map.
- The frame shrugs off alcohol and saline drips—no raw steel edges rusting quietly behind your treatment bed.
- Melamine-faced chipboard gives you a smooth stage for devices, manuals, and disposables—no splintering under heavier RF modules.
- 840 mm tall clears most counter rails; 500 × 640 mm footprint slides beside beds without stealing the therapist’s standing zone.
Shelves
POLICA ZA IPL APARATE
Park your IPL stack where it belongs: plastic-coated uprights shrug off splashes, melamine-faced shelves stay flat under handpieces and cooling gel, and the 500 × 640 × 840 mm footprint slides beside beds without blocking your standing zone. Casters and a pull handle keep the 15 kg chassis easy to reposition between rooms—ideal when hair-removal days alternate with facial-only bookings.
- The frame handles alcohol wipes and stray coupling gel without corroding—important when you sanitize between every IPL pass.
- Melamine surfaces stay smooth under optics and manuals; stack the console high, cooling accessories mid, disposables low.
- Lockable casters keep the unit planted during pulses; the integrated handle lets you pivot out of tight aisles without two-person lifts.
Shelves
STALAK ZA BODY MASTER
Give the Body Master module a stable stage: welded metal uprights rise 940 mm to a 340 × 495 mm top plate sized for the console, cables, and quick-access accessories. Glossy white finish matches clinical interiors; casters and a front pull bar keep the 20 kg chassis maneuverable between body-sculpting bays yet planted when you lock wheels for treatment. The rear edge is shaped to tame leads—fewer snags mid-protocol.
- Twenty kilograms of steel and composite mass keeps the stack steady when clients shift mid-session—your handpieces stay on target.
- 340 × 495 mm gives the device breathing room without stealing floor space—route power down the back comb and keep gels on the corners.
- The column lands above typical bed rails so you are not hunching over a floor-parked module during mapping passes.
STALAK ZA BODY CONTOUR
This metal stand gives Body Contour hardware a dedicated home: a 560 × 500 mm top plate with cutouts for handpieces and cable routing, a 440 × 470 mm base that stays planted, and 755 mm of working height that lines up with typical treatment flows. Lock in the device, then roll the whole station between rooms—casters are spec’d as yes—without lifting a 13 kg chassis more than you have to. Gross weight 13.5 kg, net 13 kg.
STALAK ZA RF FACE & BODY
Give your RF Face Body system a fixed address: plastic-coated steel uprights resist disinfectant splashes, while melamine-faced chipboard shelves stay flat and wipeable under consoles and handpieces. The cabinet occupies 500 × 640 × 840 mm—enough vertical storage for cables and gels without dominating the room—and at 15 kg it stays planted when you roll probes across the face–body map.
POLICA ZA IPL APARATE
Park your IPL stack where it belongs: plastic-coated uprights shrug off splashes, melamine-faced shelves stay flat under handpieces and cooling gel, and the 500 × 640 × 840 mm footprint slides beside beds without blocking your standing zone. Casters and a pull handle keep the 15 kg chassis easy to reposition between rooms—ideal when hair-removal days alternate with facial-only bookings.
STALAK ZA BODY MASTER
Give the Body Master module a stable stage: welded metal uprights rise 940 mm to a 340 × 495 mm top plate sized for the console, cables, and quick-access accessories. Glossy white finish matches clinical interiors; casters and a front pull bar keep the 20 kg chassis maneuverable between body-sculpting bays yet planted when you lock wheels for treatment. The rear edge is shaped to tame leads—fewer snags mid-protocol.
Stay ahead of innovation
Subscribe for news on new technologies, exclusive training, and trade-show offers—straight to your inbox.
