STALAK ZA BODY CONTOUR
This metal stand gives Body Contour hardware a dedicated home: a 560 × 500 mm top plate with cutouts for handpieces and cable routing, a 440 × 470 mm base that stays planted, and 755 mm of working height that lines up with typical treatment flows. Lock in the device, then roll the whole station between rooms—casters are spec’d as yes—without lifting a 13 kg chassis more than you have to. Gross weight 13.5 kg, net 13 kg.
Purpose-built tops route cables and stabilize the exact footprint the device expects.
That predictability shows up as cleaner sessions and fewer “sorry, the cable snagged” moments.
Add the base width to your aisle drawings—440 mm at floor level is the swing radius you need when the cart pivots.
755 mm height clears most standard bed rails but double-check lamp arms.
Net 13 kg reflects what you lift once packaging is gone; gross 13.5 kg includes protective materials for shipping—plan disposal accordingly.
Name: Stalak za Body Contour · Product code: 8040/1 · Construction: metal.
Top plate: 560 × 500 mm · Bottom plate: 440 × 470 mm · Height: 755 mm · Casters: yes.
Gross weight: 13.5 kg · Net weight: 13 kg.
Metal frame that owns the floor
Welded steel tubing and a wide footprint keep the column from flexing when clients lean in—your handpieces stay on target instead of vibrating off the mark.
Top plate sized for real setups
560 × 500 mm gives the console breathing room while routed slots keep leads from snaking across the client’s field of view.
Roll the room, not your back
Casters let one therapist reposition the entire stack for body contouring, lymphatic follow-ups, or storage—no team lift required.
755 mm: eye level where it matters
The column lands at a height that pairs naturally with treatment beds and rolling stools—less hunching over a device parked on the floor.
One cart, full treatment circuit
Park the Body Contour module at the foot of the bed for prep, glide it alongside for mapping, then wheel it to the wall rack for charging—flow stays uninterrupted.
- Bottom plate approximately 440 × 470 mm—check door widths before you roll through
Weight you can still solo-move
At roughly 13 kg net / 13.5 kg gross the stand is heavy enough to feel premium yet light enough for one person to steady on a ramp or elevator.
- Always lock casters or chock the base when the device is running
Related products
See the full range
Frequently asked questions
Find answers to your questions here.
Delivery takes 7 to 14 days on average.
Yes, with every purchased Vecom device you get free training.
If your device breaks down, we also service the device in our company!
Stay ahead of innovation
Subscribe for news on new technologies, exclusive training, and trade-show offers—straight to your inbox.
